Name: MeanWell HSP-200-5 Switching Power Supply
Brand: MEANWELL
SKU: 3031
Availability: InStock

MeanWell HSP-200-5 Switching Power Supply

$37.80

The MeanWell HSP-200-5 is a high-efficiency 200W switching power supply designed for professional LED display systems, delivering a stable 5V DC output at 40A. Built with MeanWell’s renowned reliability, this unit features active PFC, wide input voltage (90–264V AC), and comprehensive protections against overload, overvoltage, and short circuits—making it ideal for indoor full-color LED screens, digital signage, and commercial display installations. With a compact, fan-cooled design and compliance with global safety standards (CE, UL, RoHS), it ensures consistent performance and peace of mind for integrators and end-users alike.

As a trusted choice for LED display projects worldwide, the MeanWell HSP-200-5 power supply offers seamless compatibility with a wide range of LED modules and control systems, reducing integration complexity and minimizing downtime. Backed by MeanWell’s global service network and a 3-year warranty, this power supply delivers the durability and technical support required for mission-critical applications. Whether you’re upgrading an existing installation or designing a new LED display solution, the HSP-200-5 provides the reliability, efficiency, and peace of mind that define professional-grade power solutions for the LED industry.

MeanWell HSP-200-5 Switching Power Supply

Model Number:HSP-200-5
Case Size:210×62×31mm
Power: 200W
Output Type:Single
Output Current:40A
Output Voltage:5V
Output Power:101 – 200W
Output Frequency:47 ~ 63Hz
Input Voltage:90~264VAC
Certification:UL TUV CB EMC CE
Efficiency:88.5%
Ouput Voltage Adj.
Range:4.5~5.5V
Application:Industries mechanica automation, etc
Feature:Low profile 31mm;PFC; Conformal coated

Product Specifications :

Model		HSP-200-5
Input	Voltage Range	85~ 264VAC 120~ 370VAC
	FREQUENCY RANGE	47 ~ 63Hz
	AC CURRENT (Typ.)	3.5A/115VAC 1.5A/230VAC
	LEAKAGE CURRENT	<2mA / 240VAC
	INRUSH CURRENT (Typ.)	COLD START 65A/230VAC
	EFFICIENCY (Typ.)	88.5%
Output	RATED CURRENT	40A
	DC VOLTAGE	5V
	RATED POWER	200W
	CURRENT RANGE	0-40A
	VOLTAGED ADJ. RANGE	4.5~ 5.5V
	RIPPLE & NOISE (max.) Note.2	150mVp-p
	VOLTAGE TOLERANCE Note.3	±2.0%
	LOAD REGULATION Note.5	±1.5%
	LINE REGULATION Note.4	±0.5%
	HOLD UP TIME	20ms at full load
	SETUP, RISE TIME	600ms,40ms at full load
Protection	OVER VOLTAGE	5.5~ 7V Protection type :Shut off 0/p volltage, clamping by zener diode
Protection	OVER LOAD	Above 150% rated output power Protection type :Hiccup mode, recovers automatically after fault condition is removed
Safety	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	SAFETY STANDARDS Note 6	UL60950-1, CB(IEC60950-1),CCC GB4943, 1:2011 approved
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
	EMC STANDARDS	EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254
Environment	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	WORKING TEMP	-20 ~ +70 (Refer to output load derating curve)
	TEMP. COEFFICIENT	± 0.03%/℃ (0 ~ 50℃)
	STORAGE TEMP., HUMIDITY	-40 ~ +85 , 10 ~ 95% RH
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
Others	DIMENSION	2156231mm (LWH)
Others	MTBF	1608.8K hrs min. MIL-HDBK-217F (25 ) ℃
Note	I. Al parameters NOT specialy mentioned are measured at 230VAC input. rated load and 25℃ of ambient temperature. 2 Ripple & noise are measured at 20MHz Of bandwidth by usig a I2′ twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor 3. Tolerance : includes set up tolerance. line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion. 7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies’